Safety & Hazardous Information

HAZARDOUS INFORMATION

Detail Labs publishes complete safety information and Safety Data Sheets for every product in our lineup. Real chemistry deserves real disclosures. Read all safety information carefully before use. Keep all products out of reach of children and pets at all times.

For product-specific SDS documents, email support@detail-labs.com or download from the links below.

LATHER — pH-Neutral Foam Wash

Signal Word: WARNING Hazard Pictogram: Exclamation Mark Hazard Classification: Eye Irritation (Category 2A) · Acute Toxicity Oral (Category 4) Hazard Statements: H319 — Causes serious eye irritation. H302 — Harmful if swallowed.

Precautionary Statements

Prevention: Avoid contact with eyes. Wash hands thoroughly after handling. Wear eye protection during foam cannon application. Keep out of reach of children and pets. Do not eat, drink, or smoke when using this product.

Response: IF IN EYES — Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing. If eye irritation persists, get medical attention. IF ON SKIN — Wash with water. Remove contaminated clothing and wash before reuse. IF INHALED — Move person to fresh air. Seek medical attention if breathing difficulty develops. IF SWALLOWED — Rinse mouth. Do NOT induce vomiting. Call Poison Control: 1-800-222-1222. Seek medical attention.

Storage: Store between 40°F and 100°F (4°C and 38°C). Keep container tightly closed. Keep from freezing — product may separate or lose performance if frozen.

Disposal: Empty container may be rinsed and recycled in accordance with local regulations. Do not pour unused product down storm drains or into waterways.

Transport: Not classified as dangerous goods. Standard ground shipping permitted.

Download

BOND·9 — Ceramic Coating

Signal Word: DANGER Hazard Pictograms: Flame · Exclamation Mark · Health Hazard Hazard Classification: Flammable Liquid (Category 2) · Serious Eye Irritation (Category 2A) · Specific Target Organ Toxicity, Repeated Exposure (Category 3) · Reproductive Toxicity (Category 2)

Hazard Statements: H225 — Highly flammable liquid and vapor. H319 — Causes serious eye irritation. H336 — May cause drowsiness or dizziness. H361D — Suspected of damaging fertility or the unborn child (oral exposure).

Precautionary Statements

Prevention: Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking. Keep container tightly closed. Use only outdoors or in a well-ventilated area. Do not breathe vapors or spray. Wash hands and skin thoroughly after handling. Wear protective gloves, protective clothing, and eye protection. Take action to prevent static discharges. Keep away from children and pets.

Response: IF IN EYES — Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing. If eye irritation persists, get medical attention. IF ON SKIN (or hair) — Take off immediately all contaminated clothing. Rinse skin with water or shower. IF INHALED — Remove person to fresh air and keep comfortable for breathing. If breathing is difficult, give oxygen. If breathing stops, administer artificial respiration immediately. Seek medical attention. IF SWALLOWED — Rinse mouth. Do NOT induce vomiting. Call Poison Control: 1-800-222-1222. Seek immediate medical attention. IN CASE OF FIRE — Use dry chemical, CO₂, foam, or water spray to extinguish. Do not use direct water stream.

Storage: Store locked up. Store in a well-ventilated place. Keep cool. Keep container tightly closed. Keep away from heat, sparks, and open flames.

Disposal: Dispose of contents and container in accordance with local, state, and federal regulations for flammable liquids. Do not pour down drains, into soil, or into waterways.

Transport: UN1139 · Coating Solution · Class 3 · Packing Group II · Flammable Liquid

Download

MIST — Quick Detailer Spray

Signal Word: WARNING Hazard Pictogram: Exclamation Mark Hazard Classification: Eye Irritation (Category 2A) Hazard Statements: H319 — Causes serious eye irritation.

Precautionary Statements

Prevention: Wash hands thoroughly after handling. Wear eye protection during application. Avoid spraying directly into the face or eyes. Keep out of reach of children and pets.

Response: IF IN EYES — Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing. If eye irritation persists, get medical attention. IF ON SKIN — Wash with soap and water. Remove contaminated clothing and wash before reuse. IF INHALED — Move person to fresh air. Seek medical attention if breathing difficulty develops. IF SWALLOWED — Rinse mouth. Do NOT induce vomiting. Call Poison Control: 1-800-222-1222.

Storage: Store between 40°F and 100°F (4°C and 38°C). Avoid direct sunlight. Keep container tightly closed when not in use. Keep from freezing — product may separate or lose performance if frozen.

Disposal: Empty container may be rinsed and recycled in accordance with local regulations. Do not pour unused product down storm drains or into waterways.

Transport: Not classified as dangerous goods. Standard ground shipping permitted.

Download

REFINE — Paint Finishing Polish

Signal Word: WARNING Hazard Pictograms: Exclamation Mark · Health Hazard Hazard Classification: Eye Irritation (Category 2A) · Skin Sensitization (Category 1) Hazard Statements: H317 — May cause an allergic skin reaction. H319 — Causes serious eye irritation.

Precautionary Statements

Prevention: Wear protective gloves and eye protection. Avoid breathing dust or mist during machine application. Wash hands thoroughly after handling. Contaminated work clothing should not be allowed out of the workplace. Keep out of reach of children and pets.

Response: IF IN EYES — Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing. If eye irritation persists, get medical attention. IF ON SKIN — Wash with soap and water. If skin irritation or rash occurs, get medical attention. Wash contaminated clothing before reuse. IF INHALED — Move person to fresh air. Seek medical attention if breathing difficulty develops. IF SWALLOWED — Rinse mouth. Do NOT induce vomiting. Call Poison Control: 1-800-222-1222.

Storage: Store between 40°F and 100°F (4°C and 38°C). Keep container tightly closed. Avoid direct sunlight. Keep from freezing.

Disposal: Empty container may be rinsed and recycled in accordance with local regulations. Do not pour unused product down storm drains or into waterways.

Transport: Not classified as dangerous goods. Standard ground shipping permitted.

OBSIDIAN — Tire Dressing & Shine

Signal Word: WARNING Hazard Pictogram: Exclamation Mark Hazard Classification: Eye Irritation (Category 2A) · Skin Sensitization (Category 1) Hazard Statements: H319 — Causes serious eye irritation. H317 — May cause an allergic skin reaction.

Composition note: OBSIDIAN is a water-based silicone emulsion preserved with a formaldehyde-releasing preservative and containing an ethoxylated emulsifier. Free formaldehyde is reported by the manufacturer at or below 0.062 ppm by weight. Contains no petroleum solvents, naphtha, kerosene, or mineral oil. The inorganic filler is amorphous and contains no crystalline components. Proposition 65 exposure assessments for formaldehyde, ethylene oxide, and 1,4-dioxane have been completed; no warning is required. See Section 15 of the Safety Data Sheet.

Precautionary Statements

Prevention: Wear protective gloves and eye protection during application. Avoid contact with eyes and prolonged or repeated contact with skin. Use in a well-ventilated area and avoid breathing mist. Wash hands thoroughly after handling. Contaminated clothing should be washed before reuse. Keep out of reach of children and pets. Individuals with a known formaldehyde sensitivity should avoid skin contact entirely.

Response: IF IN EYES — Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing. If eye irritation persists, get medical attention. IF ON SKIN — Wash with plenty of soap and water. If skin irritation, redness, or rash occurs, get medical attention. Remove contaminated clothing and wash before reuse. IF INHALED — Move person to fresh air. Seek medical attention if breathing difficulty develops. IF SWALLOWED — Rinse mouth. Do NOT induce vomiting. Call Poison Control: 1-800-222-1222.

Storage: Store between 40°F and 100°F (4°C and 38°C). Keep container tightly closed. Avoid direct sunlight. Keep from freezing — product may separate or lose performance if frozen.

Disposal: Empty container may be rinsed and recycled in accordance with local regulations. Do not pour unused product down storm drains or into waterways.

Transport: Not classified as dangerous goods. Standard ground shipping permitted.

Tire Safety Notice: OBSIDIAN is a cosmetic tire dressing. It is not a tire repair, restoration, or maintenance product, and it does not affect or assess tire structural integrity. Apply only to the sidewall. Do not apply to the tread, contact patch, or any braking or steering surface. Inspect tires regularly for wear, damage, cracking, and correct inflation, and follow your tire and vehicle manufacturer's guidance.

Download

CLARITY — Glass Polish

Product Code: DL-2025-GP Signal Word: WARNING Hazard Pictogram: Exclamation Mark Hazard Classification: Eye Irritation (Category 2A) · Skin Irritation (Category 2) Hazard Statements: H319 — Causes serious eye irritation. H315 — Causes mild skin irritation with prolonged contact.

Precautionary Statements

Prevention: Wear protective gloves and eye protection during application. Avoid breathing dust or mist. Wash hands thoroughly after handling. Keep out of reach of children and pets.

Response: IF IN EYES — Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing. If eye irritation persists, get medical attention. IF ON SKIN — Wash with soap and water. If skin irritation occurs, get medical attention. IF INHALED — Move person to fresh air. Seek medical attention if breathing difficulty develops. IF SWALLOWED — Rinse mouth. Do NOT induce vomiting. Call Poison Control: 1-800-222-1222.

Storage: Store between 40°F and 100°F (4°C and 38°C). Keep container tightly closed. Keep from freezing.

Disposal: Dispose of contents and container in accordance with local regulations. Do not pour down storm drains.

Transport: Not classified as dangerous goods. Standard ground shipping permitted.

Note: CLARITY is an alkaline (pH ~9–10) glass polishing compound containing abrasives. NOT a daily-use spray cleaner. Use only on uncoated automotive glass. Do NOT apply to: tinted window film, ceramic-coated paint, plastic trim, or polycarbonate headlight lenses.

HABITAT — Interior Detailer

Signal Word: WARNING Hazard Pictogram: Exclamation Mark Hazard Classification: Eye Irritation (Category 2A) Hazard Statements: H319 — Causes serious eye irritation.

Precautionary Statements

Prevention: Avoid contact with eyes. Wash hands thoroughly after handling. Do not apply to steering wheel grip area or pedals. Keep out of reach of children and pets.

⚠️ DRIVING SAFETY WARNING: Do NOT apply HABITAT to the steering wheel grip area, gear selector grip, pedals, pedal pads, or footwell surfaces. Any conditioner applied to these surfaces reduces grip and can impair vehicle control. Do not apply to the interior surface of the windshield or any glass in the driver's field of view, as residue can cause glare and reduced visibility. If product is applied to any control surface in error, clean the surface thoroughly with an appropriate cleaner and verify normal grip before driving.

Response: IF IN EYES — Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing. If eye irritation persists, get medical attention. IF ON SKIN — Wash with soap and water. IF INHALED — Move person to fresh air. Seek medical attention if breathing difficulty develops. IF SWALLOWED — Rinse mouth. Do NOT induce vomiting. Call Poison Control: 1-800-222-1222.

Storage: Store between 40°F and 100°F (4°C and 38°C). Keep container tightly closed. Keep from freezing.

Disposal: Empty container may be rinsed and recycled in accordance with local regulations. Do not pour unused product down storm drains or into waterways.

Transport: Not classified as dangerous goods. Standard ground shipping permitted.

FLUX — Wheel & Iron Fallout Remover

⚠️ FLUX IS THE MOST HAZARDOUS PRODUCT IN THE DETAIL LABS LINEUP. READ ALL INSTRUCTIONS BEFORE FIRST USE.

Signal Word: DANGER Hazard Pictograms: Corrosion · Exclamation Mark Hazard Classification: Corrosive to Metals (Category 1) · Skin Corrosion (Category 1B) · Serious Eye Damage (Category 1) Hazard Statements: H290 — May be corrosive to metals. H314 — Causes severe skin burns and eye damage. H318 — Causes serious eye damage.

Precautionary Statements

Prevention: Wear chemical-resistant nitrile gloves, safety goggles or face shield, and long sleeves. Use only in a well-ventilated outdoor area. Do not breathe spray, mist, or vapors. Do not apply to hot wheels — surface temperature must be cool to the touch. Do not allow product to dry on painted surfaces, chrome, or polished metal. Do not mix with bleach, ammonia, or any other cleaning product — toxic gases may form. Wash hands and any exposed skin thoroughly after handling. Keep out of reach of children and pets at all times.

Response: IF IN EYES — Flush IMMEDIATELY with water for at least 20 minutes. Remove contact lenses if present and easy to do. Continue rinsing. CALL 911 OR SEEK EMERGENCY MEDICAL ATTENTION IMMEDIATELY. IF ON SKIN — Remove contaminated clothing immediately. Rinse affected skin with large amounts of water for at least 20 minutes. Seek immediate medical attention. Wash contaminated clothing before reuse, or discard. IF INHALED — Move person to fresh air immediately. Keep at rest in a position comfortable for breathing. If breathing is difficult, give oxygen. Call 911 if symptoms persist. IF SWALLOWED — Rinse mouth. Do NOT induce vomiting. Call Poison Control: 1-800-222-1222 or 911 immediately. Do not give anything to drink unless instructed.

Storage: Store locked up. Store in original container only — do not transfer to metal containers. Keep container tightly closed. Store away from incompatible materials including bleach, ammonia, oxidizers, and metals. Store in a cool, dry, well-ventilated area away from food and drink.

Disposal: Dispose of contents and container in accordance with local, state, and federal hazardous waste regulations. Do not pour down drains, into soil, or into waterways. Contact your local hazardous waste collection service.

Transport: Standard ground shipping with proper corrosive liquid labeling.

FOAM CANNON — Pressurized Equipment Safety

The Detail Labs foam cannon is pressurized equipment, not a chemical product. It carries no GHS hazard classification, but improper use can cause serious injury.

Prevention: Rated for pressure washers up to 4000 PSI — never exceed this rating. Wear eye protection at all times during use. Never point the cannon at any person or animal; pressurized spray can cause severe injection injuries that may not appear serious at first. Inspect the cannon, fittings, seals, and quick-connect before every use and discontinue use if any component is cracked, worn, or damaged. Release all pressure before disconnecting or opening the reservoir. Do not modify the cannon or use it with any chemical other than a dedicated automotive foaming shampoo. Do not use with hot water above the manufacturer's stated limit, or with solvents, acids, bleach, or corrosive chemicals.

Response: For any high-pressure injection injury, seek emergency medical attention immediately and tell the treating physician it is a high-pressure injection injury, even if the wound appears minor.

Storage: Rinse thoroughly with clean water after each use. Drain fully and store empty, indoors, protected from freezing.

General Safety Notice — All Detail Labs Products

Keep all products out of reach of children and pets at all times.
Always read the full product label before use.
Store all products in their original containers in a cool, dry location.
Never mix Detail Labs products with each other unless explicitly directed in the application instructions.
Never mix any Detail Labs product with bleach, ammonia, or other household cleaners. Mixing chemical products can produce toxic gases or violent reactions.
Always test any product on a small, inconspicuous area before full application, particularly on vinyl wrap, paint protection film, aftermarket finishes, and non-OEM surfaces.
Do not apply any product to steering wheels, pedals, or other control surfaces where grip is required.
Wear gloves when handling any product for an extended period, and discontinue use if a skin reaction develops.
For any chemical emergency, call Poison Control: 1-800-222-1222 or 911.
For product-specific Safety Data Sheets, email support@detail-labs.com or download from links provided.